The Best Dust Collectors
Fox W1685
The dust collector has a 1.5 horsepower motor and 1,280 CFM. This means it can extract small particles and dust from the air up to 2.5 microns. The bag can hold up to 5.4 cubic yards of debris, and the static pressure is 26 cm. Although it may look small, this unit is capable of doing a lot to remove dust and debris from your space.
The unit is powder coated and made of balanced steel. It has a 15 cm inlet, two openings 10 cm and a radial fin. The unit comes with a 30 cm extra-heavy duty steel impeller. It also runs at 110V, making it compatible with most workstations. The unit is easy to assemble and moves quickly so that you can remove all dust from your area.
This means that you can move quickly and get started on your next project right away. It is made primarily from steel and is strong enough to withstand any workshop use.
Things we don’t like:
- Washers are not the best
- Clogged holes at the intake can lead to clogged pipes.
- The wheels don’t pivot well
Shop Fox W1826 Wall Dust Collector
The 1 horsepower unit can run at 120V or240V to give you more flexibility in your workshop. The window on the side of the unit will show you how much dust it has taken in. This allows you to see how much space is left before you need to empty it. The bottom has a zipper that allows you to empty the dust.
The bag has a 10 cm intake hole. It also has filtration of up to 2.5 microns and a maximum capacity of 2 cubic feet. The bag will be 112 cm high when fully inflated. However, it can mount on the wall so you don’t have to worry too much about it.
It eliminates dust at source and reduces static loss. The unit can handle 537 CFM and has no complex ductwork. It is quite loud and can pick up small particles and dust, but it is not meant to be used as a regular vacuum cleaner.
Things we like:
Central Machinery Dust Collector
The unit is capable of running at 2 horsepower. This means that it can do a lot. The single-phase motor draws 120V from the unit and can draw 20 amps at peak. It can rotate at 3,450 rotations per hour and has a suction capacity of 1,550 CFM. This unit can collect a lot of dust and debris, even though it is heavy. It will make a great addition for your workshop.
The dust collection process is also protected by 5 microns of filtration. This means that you will get rid of both the smaller and finer pieces of dust. The bottom of the bag has a clear indicator to show how much dust it has collected. There is also a 10 cm diameter intake/exhaust.
The set includes two collection bags, the casters that allow you to move the unit about where you want it to be, and the hex wrenches for attaching it all. You can lock the casters or swivel them to ensure that the unit is in the best place for you. This unit will allow you to do almost anything and not worry about dust and debris getting in your room.
Things we like:
- 2 horsepower
- 1,550 CFM, 3450 RPM
- Intake and exhaust 10 cm in diameter
- A cost-effective unit that can be used in any workshop
Things we don’t like:
Powertec DC1510 Dust Collector
The collector is a traditional vacuum type, so it can be moved around in your workshop. You can store it in small spaces, and it can pick up fine dust and woodchips.
You can either set it up as a stationary unit, or attach the casters to make it mobile. It also has a handle so you can pick it up and transport it further. It can run at 1100 Watts and 120V at 60 Hz. Although the 108 CFM is less than others, it still delivers enough power. The 59 Liter tank is also larger than most of our options.
The unit comes with a 2.0m hose that can pick up any object. There are many other great features and accessories. The canister includes a locking band, a locking band, a locking band, and (4) stackable hose adapters. In no time, you’ll be ready to go.
Things we like:
Jet DC-650BK Dust Collector
The unit is reasonably priced and can be connected to three machines to clean your space. The bag is easy to set up and can collect a lot of debris and dust. It then quickly emptys it out. It is easy to remove the bag when it is time to attach it again.
The single-stage design is more cost-effective and keeps the system running more quietly. There are four wheels to make it portable and move easily. The motors can be fan-cooled to ensure they run for as long as possible. Additionally, the whole unit is enclosed.
This prevents dust and debris from entering the fan or motor, so that it doesn’t overheat. Although it is large, this unit is lightweight and can filter 30 microns of dust. This unit can take care of most of the dust and debris that you will find in any workshop where your time is limited.
Things we like:
- 5-year warranty
- 1 horsepower
- Bag is easy to take out
- Easy to attach to machines
- Operates quietly
Things we don’t like:
- Low level of filtration
- Not ideal for larger tools
- Packaged poorly
Take A Look At These Features
You want the best quality tool possible when you are looking for it. The most important features are what you need to know before you begin looking for the right unit. You’ll see why we love the features we have. You can also take a look at other options and see what you need to remember each time you use them.
Horsepower
You should first look at how powerful the unit is. Higher horsepower means more power and the hose length will be affected. Higher horsepower means it can handle a longer length of hose without losing any suction power.
You may only need to use the unit with a small hose. However, if you need it to go further, a more powerful unit will be required. Consider how you’ll be using it and find the right unit for you. This will give you the best features and capabilities.
Micron Filtration
Next, you need to determine how many microns it filters. This is the most important number to consider. A large number can mean that it is collecting more pieces, whereas a smaller number could indicate that it is getting less dust.
This means that a 1 micron filter is better than a 30-micron filter. The lower the number, the better. Dust is more harmful than chips or larger pieces. It will be possible to keep harmful dust and other debris from your lungs and store them safely.
Cubic Feet Per Minute
The CFM is the volume of air that can move through the unit within a certain time. You will get more suction if the CFM is higher. The higher the CFM, the more air you can pull in. This is because it’s less densely packed with dust and dirt. It means that your air cleaners will work faster.
It is important to assess the amount of debris your tools produce and then choose a unit capable of handling it. You should aim for a range of 300 CFM to 900 CFM.
Vacuum Vs. Dust Collector
Also, you should consider whether a dust collector is what youre actually looking for. Shop vacuums can collect a lot of dust or wood chips due to their high suction abilities and ability to reach small spaces in your tools. You can connect them to almost any item you require. A dust collector, on the other hand can be smaller and more portable, but also less expensive. When choosing between the two, you will need to consider your requirements.
Take A Bow
The Shop Fox W1685, our top choice, is the best. Although it has a lower horsepower than our other systems, 1.5 is sufficient to complete most tasks and fit a larger hose. It has a 2.4 micron filter system, which we believe is the best we have found.
It will remove even the smallest amount of dust and debris quickly. The Powertec DC1510 dust collector is a better choice if you want something that feels more like a shop vacuum. This vacuum has a more vacuum-like feel, but you can still get some dust and debris out of it.
